Straightening cut - 株式会社笹岡直線

About echnology of straightening by Sasaoka Steel

We can straightening cut from mild steel and stainless steel wire rod.
We can straightening and cutting length form wire rod that customer requirements. (Diameter : φ3.0mm-φ30mm), (length : 40mm – 6000mm)
And we have been well received from customers because of sheared surface are less burr and shear droop, less deform.

Service details

Spec

We serve below.
Carbon Steel Wire: SS400, CH, SWRM and others
Stainless Wire: SUS304, SUS304J3, SUS316 and others
Others (We can cut Copper, Aluminum, Titanium and others also (depend on the diameter and tensile strength))

加工後の鋼線線材の写真 Photograph of processed steel wire

Diameter and Cutting length

We serve Wire Rod. It will be as shown in the table below.

Diameter

Carbon Steel	Stainless Steel
About 3.4mm～30.0mm	About 3.0mm～30.0mm

※Please ask us of Others.

Cutting length

Diameter	Minimum length	Max length
Less than φ14.3mm	40mm	6,100mm
～φ21.7mm	70mm	6,100mm
φ23.0mm～	100mm	6,100mm

※Please ask us of Others diameter or cutting length.

Machine spec

	Machine	Maker	Model number	Start operation	Diameter	Length※	Pin cut	Remark
1	Wire Straightening & Cutting-off Machine	Toteno	—	Nov,1998	φ6.0～10.0mm	100～6,000mm	×
2	Wire Straightening & Cutting-off Machine	Takashima	TG-4AS	Jun,2011	φ3.0～6.0mm	24～250mm	○
3	Wire Straightening & Cutting-off Machine	Takashima	TCH-3A	1997(2nd Hand)	φ5.0～10.0mm	30～500mm	40mm up
4	Wire Straightening & Cutting-off Machine	Takashima	TC-3AS	Aug,2018	φ5.0～10.0mm	30～6,000mm	30～500mm
5	Wire Straightening & Cutting-off Machine	Takashima	TCH-9	2003	φ3.0～9.0mm	30～2,000mm	○
6	Wire Straightening & Cutting-off Machine	Takashima	TB-3	Dec,2009	φ7.0～12.0mm	60～2,000mm	40～600mm
7	Wire Straightening & Cutting-off Machine	Takashima	TB-3S	Jan,2011	φ7.0～12.0mm	60～4,000mm	40～600mm
8	Wire Straightening & Cutting-off Machine	Takashima	TCH-14	Mar,2003	φ8.0～13.0mm	30～4,000mm	45～4,000mm	for oil drawing
9	Wire Straightening &amp Cutting-off Machine	Takashima	TB-1D	Aug,2006	φ7.0～14.5mm	30～6,000mm	○	for lime drawing
10	Wire Straightening & Cutting-off Machine	Takashima	TCH-20	Jan,2016	φ10.0～20.0mm	50～6,100mm	○
11	Wire Straightening & Cutting-off Machine	Takashima	TCH-25	Mar,2004	φ13.0～30.0mm	60～6,100mm	105mm up
12	Wire Straightening & Cutting-off Machine	Takashima	TCH-25	Feb,2016	φ13.0～30.0mm	60～6,100mm	105mm up

	Machine	Maker	Model number	Start operation	Diameter	Length※	Pin cut	Remark
1	Wire Straightening & Cutting-off Machine	Toteno	—	Nov 1998	φ6.0～10.0 mm	100～6,000 mm	×
2	Wire Straightening & Cutting-off Machine	Taka shima	TG-4AS	Jun 2011	φ3.0～6.0 mm	24～250 mm	○
3	Wire Straightening & Cutting-off Machine	Taka shima	TCH-3A	1997 (2nd Hand)	φ5.0～10.0 mm	30～500 mm	40mm up
4	Wire Straightening & Cutting-off Machine	Taka shima	TC-3AS	Aug 2018	φ5.0～10.0 mm	30～6,000 mm	30～500 mm
5	Wire Straightening & Cutting-off Machine	Taka shima	TCH-9	2003	φ3.0～9.0 mm	30～2,000 mm	○
6	Wire Straightening & Cutting-off Machine	Taka shima	TB-3	Dec 2009	φ7.0～12.0 mm	60～2,000 mm	40～600 mm
7	Wire Straightening & Cutting-off Machine	Taka shima	TB-3S	Jan 2011	φ7.0～12.0 mm	60～4,000 mm	40～600 mm
8	Wire Straightening & Cutting-off Machine	Taka shima	TCH-14	Mar 2003	φ8.0～13.0 mm	30～4,000 mm	45～4,000 mm	for oil drawing
9	Wire Straightening &amp Cutting-off Machine	Taka shima	TB-1D	Aug 2006	φ7.0～14.5 mm	30～6,000 mm	○	for lime drawing
10	Wire Straightening & Cutting-off Machine	Taka shima	TCH-20	Jan 2016	φ10.0～20.0 mm	50～6,100 mm	○
11	Wire Straightening & Cutting-off Machine	Taka shima	TCH-25	Mar 2004	φ13.0～30.0 mm	60～6,100 mm	105mm up
12	Wire Straightening & Cutting-off Machine	Taka shima	TCH-25	Feb 2016	φ13.0～30.0 mm	60～6,100 mm	105mm up

Straightening cut | Sasaoka Steel Co., Ltd. - Steel Wire Rod, Stainless Wire Rod Straightening cut